Documents
SIEMENS Certificates
System Integrator (SI)
S-engineering is an official partner of the Department of Industrial Automation, Continuous Processes and Drives (DF / PD) of Siemens Ukraine as a SYSTEM INTEGRATOR (SI) in the following areas:
- Components for SIMATIC automation systems
- Low-voltage switching equipment SIRUS, SIMOCODE
- Frequency converters less than 250 kW
- Low voltage motors
- Frequency converters and motors over 250 kW
- Instrumentation
Factory Automation, Process Control System, Drives & Motion.
SIVACON Technology Partner
SIVACON meets the needs of the global market; for example, it meets the desire for a standard solution on one hand, and on the other – to obtain it from a local supplier, which translates into advantages in financing and proximity of the supplier.
The S-engineering company has licensing rights for the design and manufacture of complete low-voltage switchgears for currents up to 7400A, assembled using SIEMENS SIVACON 8PT, SIVACON S8 technologies.
Technology Partner of SIEMENS for SIVACON technology
Our company is a Technology Partner of SIEMENS for the SIVACON S8 and SIVACON 8PT technologies.
It is the first and only company in Ukraine to receive a license for the production of motor control switchboards in an extended withdrawable design (option with compact withdrawable modules 1/2, 1/4).
The work of S-Engineering fully complies with all quality standards of SIEMENS AG.
SIMOPRIME Technology Partner
SIMOPRIME are medium voltage switchgear with vacuum circuit-breakers (air-insulated) for maximum operating voltage up to 17.5 kV.
SIMOPRIME is a one-stop solution for every region and every requirement.
The company “S-engineering” has licensing rights for the design and manufacture of complete medium voltage switchgear 6-10 kV, for currents up to 3600A using SIEMENS SIMOPRIME technology.
Partner certificates
The decision to approve the supplier of the State Enterprise National nuclear power generating company “Energoatom”
Certificate ISO 9001:2015 “Quality Management System”
Quality improvement of products and services on the basis of implementation of international quality system ISO 9001:2015 is the main strategic task of the “S-engineering” company.
The quality policy of “S-engineering” LLC is oriented for provision of specific requirements and expectations of customers by means of:
- Systematic and high-quality analyses of information about requirements to products of “S-engineering” as per expectations of customer.
- Development, manufacturing and delivery of products according to customer’s requirements, laws and regulations.
- Application of process approach in the course of practical implementation and improvement of Quality Management System of “S-engineering” LLC.
- Continuous improvement of “S-engineering” LLC on the basis of systematic analyses of results of Quality Management System and putting the best achievements of Quality Management System into practice.
- Studying and satisfying society needs in connection with activities of “S-engineering” LLC.
The strategic goals of “S-engineering” LLC in the field of quality are as follows:
- Providing customers with high-quality products and services at reasonable price and on time;
- Creating a stable image of reliable partner for long-time cooperation;
- Developing “S-engineering” LLC and securing stable production;
- Improvement of labor conditions and creation of attractive conditions for professional and working promotion.
Certificate ISO 14001:2015 “Environmental Management System”
ISO 14001:2015 international standard establishes requirements to environment management system for giving an organization a chance to develop and introduce effective ecological policy and by that to provide balance between profitability keeping and influence on environment reduction.
This certificate confirms “S-engineering” will and readiness to assume liability of enterprise ecological efficiency constant improvement.
With the help of ISO 14001 certification “S-engineering”:
- openly declares its adherence to environment protection;
- confirms its aspiration to observe corresponding legislative and standard requirements;
- demonstrates to clients and employees its modern, innovative and far-sighted business dealing approach;
- has got an opportunity to introduce management of ecological risks’ higher level.
“S-engineering” confirms with its activity that successful and progressive technologies can and should act friendly in relation to environment.
Certificate ISO 45001:2018 “Occupational Health and Safety Management System”
ISO 45001:2018 international standard gives requirements to professional labor safety and hygiene control system for giving an organization possibilities to operate professional risks in hygiene and labor safety field of and to raise this control efficiency.
The aspiration to reach professionalism, competence and controllable, predicted personnel behavior participating in production or service rendering is the standard basis.
Accordance to demands is gained with developed and introduced documentation, concerning management of the risks, describing an order of creation, describing control system integrity introduction and maintenance with hygiene and labor safety protection.
With the help of ISO 45001:2018 “S-engineering” can now:
- Eliminate or minimize risks for personnel which can be exposed to working conditions dangers, connected with professional activity.
- Introduce, support and improve hygiene and labor safety management system.
- Get convinced that system meets requirements of self-established policy in the field of hygiene and labor safety.
- Eliminate or reduce risk for executors which can be exposed to professional safety and health risks, connected with their activity.
- Carry out control over dangerous production factors.
- Operate risks arising in industrial activity course.
- Prevent incidents, failures, supernumerary situations occurrence.
- Integrate professional safety and health control system with operating control systems.
ISO 45001:2018 certificate reception confirms:
“S-engineering” conducts steadfast control of industrial and professional risking factors, safeguards its personnel at their workplaces.
ISO 50001:2011
International Standard ISO 50001:2011 establishes the principles of Energy Resources Management at the Industrial Enterprises, as well as in Commercial, Institutional, Public buildings and Organizations as a whole.
Some Organizations cannot control the prices for energy resources, Government policies and the global economy, but they can improve Energy Management here and now.
Improvement of energy efficiency can quickly benefit the Organizations by maximum use of energy sources and related assets that will make possible to reduce both the costs and energy consumption.
The Standard is oriented for:
- Help for Organizations in more efficient use of existing energy consuming assets;
- Ensuring of transparency and simplification of informing about rational use of energy resources;
- Assistance in the implementation of better practice in Energy Management and stimulation of rational use of energy;
- Assistance in the assessment of objects and priority of implementation of new energy-saving technologies;
- Arrangement of conditions for improving of energy efficiency in supply chain;
- Integration with other management systems of Organization, such as Environmental management systems and Health and Safety management systems.
This Standard makes possible to formulate the technical and management Principles for improvement of energy efficiency, reduction of costs and environmental indicators improvement.
S-engineering LLC is one of the first Companies in Ukraine, which has passed the Certification audit according to Standard ISO 50001:2011.
Today we became a part of international program on Energy Efficiency and along with leading world Companies we will be able to make our own contribution to reduction of energy resources depletion and mitigation of negative effects of energy use (such as global warming) all over the world.
